Plumbing Applications

Connecting Quick Connect Ball Valves

Ball Valves Push Connect Technology

A ball valve is a valve that opens by turning a handle attached to a ball inside the valve. The ball has a port, or hole, through the middle so that when the port is in line with both ends of the valve, there will be flow. When closing the valve, the hole is perpendicular to the ends of the valve, blocking the flow. The handle or lever will be inline with the port position allowing you to see the valve's position.

Ball valves are durable and usually work to achieve perfect shutoff even after years of disuse. They are therefore an excellent choice for shutoff applications and can be installed on a variety of pipes. Our ProBite ® ball valves allow you to connect to Copper, CPVC, and PEX tubing in seconds without the use of messy glues or crimp tools.


Installing Quick Connect and Disconnect Ball Valves

push-to-connect ball valvesProBites Ball Valves allow you to connect to pipe in seconds without the special tools involved with other methods. Need to install a ball valve for a shutoff application? Instead of having to buy crimp or soldering tools and accessories, simply use a push fit ProBite ® ball valve which will allow you to push and snap the ball valve right onto your pipe and make a secure leak free connection. The only steps that are involved is making sure you clean, cut, and mark your pipe like you would do with any other method of piping installation. View our complete line of push connect ball valves and stop valves.

Connect Copper, PEX tubing, and CPVC in just seconds. ProBites Push Connect Ball Valves can be used on a variety of piping materials, tested to 900 PSI and are recommended for temperatures up to 220 degrees Fahrenheit, at 200 PSI.

Common Ball Valve Applications: Fluids, Inert Gases, Water, and Air. Used for manufacturing, municipal, residential, and commercial applications including potable water, heating, cooling, treated water, breathable air, condensers and much more.


Copyright ProBite.com 2012 - ProBite ® push connect plumbing fittings by Quick Fitting Inc.
ProBite ® is a registered trademark of Quick Fitting Inc. All other trademarks are the property of their respective owners.